BoConcept logo

Osaka

Osaka chair, tufted seat

Leg:

  • oak

Upholstery:

  • mocca Estoril leather 0954

As shown €2,759.00

From €949.00

Osaka

Materials

  • Armrest: Top 35 kg/m3 CMHR foam. Inside 35 kg/m3 CMHR foam. Outside 35 kg/m3 CMHR foam
  • Back: 35 kg/m3 CMHR foam
  • Back cushion: 27 kg/m3 CMHR foam/ wadding
  • Frame: Solid pine, particleboard, plywood, hardboard
  • Seat: Tufted 35 kg/m3 CMHR foam / wadding Plain 35 kg/m3 CMHR foam / foam/feather mix / wadding
  • Suspension: Nozag springs
  • Fabric lining: Non-woven fabric (120g/m2), non-woven fabric (80g/m2), treton cotton fabric, jacquard fabric
  • Upholstery composition: Semi aniline leather, 90% natural grain, 1,4 mm thick (average)

Item number

4331058CA220954

Designed by

Anders Nørgaard

Finish

  • Leg: lacquered

Assembly instructions

Easy assembly difficulty

Dimensions

  • Armrest height: 68 cm
  • Depth: 87½ cm
  • Height: 80/48 cm
  • Seating height: 48 cm
  • Weight: 34 kg
  • Maximum weight load: 125 kg
  • Width: 90 cm

Estoril

ESTORIL is a semi-aniline leather made from European or Brazilian cow hides. ESTORIL has undergone a slight correction of the grain leaving 90% of the natural grain intact and most hallmarks visible. The surface has only received a thin layer of colour, not enough to close the pits, meaning that moisture and heat are transferred into the leather. ESTORIL requires more maintenance than a corrected leather as it is more sensitive towards liquids, dirt etc.ESTORIL is high-quality leather with a soft and comfortable seating comfort. Over the years ESTORIL will develop a beautiful patina. Ideal if you appreciate the beauty and characteristics of a natural leather, but prefer less maintenance than an aniline leather.